API GL-5, ZF TE-ML 05C,12C,16E
GEAR PLUS SYNTHETIC 75W-90 GL-5 L.S.
Synthetic technology premium performance gear lubricant suitable for gearbox and limited slip differential integrated or not in the gearbox. Reduces noise and vibrations in the axle. Effective wear resistance ensures protection under high loads and prevents damage to components.
| BRAND | |
|---|---|
| CAPACITY LITRES |
Description
Related products
TRANS THERM
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.
GEAR PLUS 80W-90 GL-5
Premium quality multipurpose gear oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. Fortified with extreme pressure (EP) additives ensures oxidation and thermal stability under all operating conditions so as to protect against the formation of deposits and oil thickening. Prolonged components’ life and smooth shift ability are some of its benefits.
GEAR OIL 90 GL-5 L.S.
Premium quality gear oil which is suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required. Fortified with extreme pressure (EP) additives to achieve wear protection under high pressure and load conditions.
ANTIFREEZE 100%
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.