Complies with:
AFNOR NF R15-601, AS 2108, ASTM D3306, BS 6580 : 2010, CUNA NC 956-16, ONORM V 5123, FVV Heft R443, SAE J 1034, UNE 26-361
ANTIFREEZE 100%
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.
| BRAND | |
|---|---|
| CAPACITY LITRES |
Description
Related products
SPEEDFLU -20 °C
Ready-to-use monoethylene glycol-based, antifreeze solution in de-ionized water. It offers antifreezing protection down to –20°C. Based on coolant concentrate conforming to BS 6580:2010. Reinforced with special anticorrosion and antirust additives. Recommended for use in cooling systems of all types of liquid-cooled automotive and industrial internal combustion engines such as car radiators, solar water heating systems and other closed-water circuits operating under extreme temperature conditions.
TRANS THERM
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.
INDUSTRIAL ISO 150, 220, 320,460
High quality extreme pressure (EP) oils designed to lubricate heavy duty industrial gear units. With their anti-friction properties and high load carrying capacity they can offer superior performance in gears. Outstanding corrosion protevtion and excellent shear stabilty are some of their characteristics. Designed for use in most enclosed industrail gearboxes using steel spur and helical gear drives with circulation or splash lubrication systems. Suitable for lubrication of bearings and other components by immersion in a lubricant bath or in circulating and splash lubricated systems.
SORELA P 46, P 68, P 100, P 150
Series of superior quality lubricants formulated with antiwear additives and highly refined base oils for high-pressure air compressors. They fully meet the strictest requirements of DIN 51506 Category VDL. Grades 46 & 68 can be used for rotary, oil-flooded screw air compressors and centrifugal air compressors requiring oils with oxidation stability and antirust ability. Grades 100 & 150 are suitable for the lubrication of all reciprocating compressors.