API GL-5, ZF TE-ML 05C,12C,16E
GEAR OIL 90 GL-5 L.S.
Premium quality gear oil which is suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required. Fortified with extreme pressure (EP) additives to achieve wear protection under high pressure and load conditions.
| BRAND | |
|---|---|
| CAPACITY LITRES |
Description
Related products
Synthetic technology premium performance gear lubricant developed for use in final drives with or without limited slip differentials (LSD). Reduces noise and vibrations in the axle. Effective wear resistance ensures protection under high loads. Exceptional stability at high temperatures extending the life of lubricant and axle.
High quality oils for all agricultural machinery from most known manufacturers, enhanced with premium Tractor STOU additive. Suitable for use in all parts of the machine, engine, mechanical transmissions, hydraulic systems, wet brakes or/and immersed brake clutches of harvesters and tractors. Key performance benefits are superior engine performance, as well as wear and frictional control which leads to extended machine life, reduced downtime and improved performance.
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.
High cleanliness, ready-to-use diesel exhaust fluid of 32,5% urea in ultra pure water. Used as an additive in heavy duty truck and bus diesel engines, equipped with selective catalytic reduction systems. Suitable for EURO IV, V and VI engines. NOT to be added in the fuel tank. In accordance with ISO 22241”Diesel engines-ΝΟx reduction agent AUS32”. At product temperatures between -5 °C and 25 °C AdBlue has a shelf life of 12 months after production. ADBLUE® is registered trademark of Verband der Automobilindustrie e.V.
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.