API SL/ CF, ACEA A3/B4, MB 229.1, MAN 271, VOLVO VDS, DEUTZ DQC-I-05
Description
Related products
High cleanliness, ready-to-use diesel exhaust fluid of 32,5% urea in ultra pure water. Used as an additive in heavy duty truck and bus diesel engines, equipped with selective catalytic reduction systems. Suitable for EURO IV, V and VI engines. NOT to be added in the fuel tank. In accordance with ISO 22241”Diesel engines-ΝΟx reduction agent AUS32”. At product temperatures between -5 °C and 25 °C AdBlue has a shelf life of 12 months after production. ADBLUE® is registered trademark of Verband der Automobilindustrie e.V.
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.
Premium quality multipurpose gear oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. Fortified with extreme pressure (EP) additives ensures oxidation and thermal stability under all operating conditions so as to protect against the formation of deposits and oil thickening. Prolonged components’ life and smooth shift ability are some of its benefits.
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.