API GL-5, MIL-L-2105D, MAN 342M-2, ZF TE-ML 7A, 12E, 16D, 17B, 19B, 21A
GEAR PLUS SYNTHETIC 75W-80 GL-5
Synthetic technology multipurpose automotive gear lubricant recommended for manual transmissions (if the manufacturer recommends this oil quality), transfer cases and axle drives operating under moderate or severe conditions and in extremely cold or hot environments. Excellent wear protection even in the most severe applications, such as hypoid final drives. It provides smooth gear shifting at the start.
| BRAND | |
|---|---|
| CAPACITY LITRES |
Description
Related products
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.
Lithium-thickened lubricating grease based on a balanced mixture of mineral oils enforced with graphite and Molybdenum disulfide. Graphite forms a tenacious protective lubricating film on metal surfaces that ensures continuous protection at high pick temperatures. Designed for a multitude of applications and all types of bearings operating at elevated temperatures.
Premium quality gear oil which is suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required. Fortified with extreme pressure (EP) additives to achieve wear protection under high pressure and load conditions.
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.