API SL, JASO MA/MA2
4T FULL SYNTHETIC 5W40
100% synthetic lubricant for four-stroke motorcycle engines. Formulated with high technology additives to withstand very high loads and in most severe operation conditions like very low temperatures as well as extreme riding conditions including sustained operation at high rpm.
| BRAND | |
|---|---|
| CAPACITY LITRES |
Description
Related products
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.
Ready-to-use monoethylene glycol-based, antifreeze solution in de-ionized water. It offers antifreezing protection down to –20°C. Based on coolant concentrate conforming to BS 6580:2010. Reinforced with special anticorrosion and antirust additives. Recommended for use in cooling systems of all types of liquid-cooled automotive and industrial internal combustion engines such as car radiators, solar water heating systems and other closed-water circuits operating under extreme temperature conditions.
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.
Premium quality gear oil which is suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required. Fortified with extreme pressure (EP) additives to achieve wear protection under high pressure and load conditions.
