MOTO CROSS – ENDURO – GR, API TC, JASO FC, ISO-L-EGC
S- SYNTH 2T MIX
Semi-synthetic lubricant for two-stroke engines, suitable for high performance air-cooled or water-cooled, for both oil injection and pre-mix lubrication, as per manufacturers’ instructions. It reduces exceptionally the exhaust smoke and emissions. It assures excellent engine cleanliness under difficult and extreme operating conditions. Lubricant for daily and moto-cross racing.
BRAND | |
---|---|
CAPACITY LITRES |
SKU:
131
Categories: MOTORCYCLE LUBRICANTS, PRODUCTS, TWO-STROKE ENGINE OILS
Description
Related products
ADBLUE
High cleanliness, ready-to-use diesel exhaust fluid of 32,5% urea in ultra pure water. Used as an additive in heavy duty truck and bus diesel engines, equipped with selective catalytic reduction systems. Suitable for EURO IV, V and VI engines. NOT to be added in the fuel tank. In accordance with ISO 22241”Diesel engines-ΝΟx reduction agent AUS32”. At product temperatures between -5 °C and 25 °C AdBlue has a shelf life of 12 months after production. ADBLUE® is registered trademark of Verband der Automobilindustrie e.V.
ANTIFREEZE 100%
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.
GEAR PLUS 80W-90 GL-5
Premium quality multipurpose gear oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. Fortified with extreme pressure (EP) additives ensures oxidation and thermal stability under all operating conditions so as to protect against the formation of deposits and oil thickening. Prolonged components’ life and smooth shift ability are some of its benefits.
TRANS THERM
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.
GEAR PLUS SYNTHETIC 75W-140 GL-5 L.S.
Synthetic technology premium performance gear lubricant developed for use in final drives with or without limited slip differentials (LSD). Reduces noise and vibrations in the axle. Effective wear resistance ensures protection under high loads. Exceptional stability at high temperatures extending the life of lubricant and axle.
GEAR PLUS 85W-140 GL-5
Premium quality multipurpose gear oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. Fortified with extreme pressure (EP) additives ensures oxidation and thermal stability under all operating conditions so as to protect against the formation of deposits and oil thickening. Prolonged components’ life and smooth shift ability are some of its benefits.
SORELA P 46, P 68, P 100, P 150
Series of superior quality lubricants formulated with antiwear additives and highly refined base oils for high-pressure air compressors. They fully meet the strictest requirements of DIN 51506 Category VDL. Grades 46 & 68 can be used for rotary, oil-flooded screw air compressors and centrifugal air compressors requiring oils with oxidation stability and antirust ability. Grades 100 & 150 are suitable for the lubrication of all reciprocating compressors.