DIN 51825 KPF2 N-30
GREASE LITHIUM MoS2
Lithium-thickened lubricating grease based on a balanced mixture of mineral oils enforced with graphite and Molybdenum disulfide. Graphite forms a tenacious protective lubricating film on metal surfaces that ensures continuous protection at high pick temperatures. Designed for a multitude of applications and all types of bearings operating at elevated temperatures.
| BRAND | |
|---|---|
| CAPACITY LITRES |
Description
Related products
Premium quality multipurpose gear oil which may be used in differentials, final drives and other applications in passenger cars and commercial vehicles where API GL-5 performance is required. Fortified with extreme pressure (EP) additives ensures oxidation and thermal stability under all operating conditions so as to protect against the formation of deposits and oil thickening. Prolonged components’ life and smooth shift ability are some of its benefits.
Series of superior quality lubricants formulated with antiwear additives and highly refined base oils for high-pressure air compressors. They fully meet the strictest requirements of DIN 51506 Category VDL. Grades 46 & 68 can be used for rotary, oil-flooded screw air compressors and centrifugal air compressors requiring oils with oxidation stability and antirust ability. Grades 100 & 150 are suitable for the lubrication of all reciprocating compressors.
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.