ISO 6743-12 Family Q, Meets typically DIN 51522 requirements
TRANS THERM
Premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. Formulated from stable paraffinic base oils that are fortified with high temperature oxidation inhibitors that carry away heat from critical components. Low viscosity enables superb fluidity and heat transfer over a wide temperature range. Suitable for use in chemical and process plant, textile manufacture, etc. It can be used in high temperature continuous heat transfer equipment with the following application limits: Maximum film temperature: 340°C and Maximum bulk temperature: 250°C.
| BRAND | |
|---|---|
| CAPACITY LITRES |
Description
Related products
GEAR PLUS 80W-90 GL-5 L.S.
Premium quality gear oil which is suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required. Fortified with extreme pressure (EP) additives to achieve wear protection under high pressure and load conditions.
GEAR OIL 90 GL-5 L.S.
Premium quality gear oil which is suitable for use in limited slip differentials in cars and commercial vehicles where API GL-5 oils with specific limited slip friction performance is required. Fortified with extreme pressure (EP) additives to achieve wear protection under high pressure and load conditions.
ADBLUE
High cleanliness, ready-to-use diesel exhaust fluid of 32,5% urea in ultra pure water. Used as an additive in heavy duty truck and bus diesel engines, equipped with selective catalytic reduction systems. Suitable for EURO IV, V and VI engines. NOT to be added in the fuel tank. In accordance with ISO 22241”Diesel engines-ΝΟx reduction agent AUS32”. At product temperatures between -5 °C and 25 °C AdBlue has a shelf life of 12 months after production. ADBLUE® is registered trademark of Verband der Automobilindustrie e.V.
SORELA P 46, P 68, P 100, P 150
Series of superior quality lubricants formulated with antiwear additives and highly refined base oils for high-pressure air compressors. They fully meet the strictest requirements of DIN 51506 Category VDL. Grades 46 & 68 can be used for rotary, oil-flooded screw air compressors and centrifugal air compressors requiring oils with oxidation stability and antirust ability. Grades 100 & 150 are suitable for the lubrication of all reciprocating compressors.
GEAR PLUS SYNTHETIC 75W-140 GL-5 L.S.
Synthetic technology premium performance gear lubricant developed for use in final drives with or without limited slip differentials (LSD). Reduces noise and vibrations in the axle. Effective wear resistance ensures protection under high loads. Exceptional stability at high temperatures extending the life of lubricant and axle.
GREASE LITHIUM MoS2
Lithium-thickened lubricating grease based on a balanced mixture of mineral oils enforced with graphite and Molybdenum disulfide. Graphite forms a tenacious protective lubricating film on metal surfaces that ensures continuous protection at high pick temperatures. Designed for a multitude of applications and all types of bearings operating at elevated temperatures.
ANTIFREEZE 100%
Engine coolant concentrate monoethylene glycol-based, antifreeze solution in de-ionized water conforming to the requirements of BS 6580:2010. It is suitable for both petrol and diesel engines. Reinforced with special anticorrosion and antirust additives. When it is diluted with water to a concentration of 50% by volume,
the optimal protection against freezing, boiling and corrosion are achieved. Concentrations less than 25% or greater than 70% are not recommended.